GEGeek's How to Articles 03/2008 Tips for Mapped Drives aka "Shared Drives" or simply "Shares"
Tips Contents Intro to Mapped Hard Drives How to Map a Drive How to Disable The Auto Login to Mapped Drives Feature How To Delete Mapped Drives That Arent Needed Any More Folder Sharing Word of Caution to Administrators Unable to Map Drives Backing up your data files to a shared drive. You can also use the net_use command to auto login to mapped drives for your customers To Disconnect a mapped drive. Logon Script keeps asking for a password. Why do some mapped drives show a red X or Disconnect on me after a while. How Drive Letters are Assigned to Mapped Drives. Did You Know That You Can Change the Assigned Windows Drive Letters Mapping a Folder as a Virtual Drive with a Drive Letter Not enough server storage is available to process this command How can I make a particular drive always have the same drive letter How to Create a Password for a Mapped_Drive How to add a Map Drive button to the toolbar
Intro to Mapped Hard Drives Mapped drives can be very useful when it comes to moving data around on an office or home network and they do have their usefulness. At work I have one server with all my client's programs and I install each program as needed remotely via the mapped drive. Mapping a drive essentially places the remote drive within your local drive paths and thus acts like a local drive. You can now install software from this drive as if it were actually part of your local system, thus the name "Mapped Drive". You can even backup or restore software across the LAN to and from this mapped drive. For those of you who don't already know how to map a drive I've included a link for you. How to Map a Drive in XP It's pretty simple. After you learn how to map drives you'll want to read the rest of this article for the tips on how to be more effective with your shares. I'm assuming here that the reader already has had some experience with mapping drives. One of the problems I typically see with mapped drives is when Windows reboots it always tries and reconnects with the mapped drive. This might and might not be a good idea at times. If there is a network issue or server issue where the mapped drives resides it could significantly delay your boot up time or cause annoying errors. Which is why I always try and use the UNC address when possible. UNC Address Definition: UNC provides a naming convention for identifying network resources. A UNC name consists of three parts, a server name, a share name, and an optional file path, that are combined using backslashes as follows: \\server\share\file_path or \\10.10.1.29\ShareName\FolderName Yes they are other ways to prevent Windows from trying to reconnect at login. One way is through Windows Explorer. You can uncheck the following tick mark when you first try and map a drive.. 
Or you could tell Windows to disable this feature all together. How to Disable Auto Logins Feature First thing you'll want to do is load up regedit (Start -> Run then type regedit and press the Ok button) and scroll to this path HKEY_USERS -> Default -> Software -> Microsoft -> WindowsNT -> CurrentVersion -> Network -> Persistent Connections. Once there look for the SaveConnections string value and give it the value 'no'. Now when you boot your system your computer will not automatically try to reconnect with any mapped drives.
Top How To Delete Mapped Drives That Aren't Needed Any More When I no longer need the links, I do the following: Open My Computer. You should see a drive for each of the mapped network drives. Right-click a drive you want to delete and choose Disconnect. The drive assignment will disappear from My Computer and from the Map Network Drive dialog box.
Folder Sharing With Windows when you share a folder or drive on a network, users can see all the shared drives simply by browsing the network, even if they don't have permission to access the share. A good trick to hide these shared drives from these users is to put a "$" after the shared name. For instance, if you're going to share the C drive on your system put a shared name for the drive as follows: C$ So your path to the drive would be \\10.10.1.29\ShareName$
Word of Caution to Administrators Administrators must take precautions when logging into workstations that have drive mappings to their servers. Many viruses will propagate using the mapped drive. If an administrator has full access to servers and logs-in to a workstation that has a drive mapped to a server, and the workstation happens to be infected with a worm, it may infect the server as well. Mapping a network drive requires TCP ports 135, 139 and 445 along with UDP port 137 to be open. A quick google search on these ports will show multiple vulnerabilities out there for these ports. So be careful. Top
Unable to Map Drives? If you are unable to map a drive check that the "Server" service is running on your box and/or File and Printer Sharing is not disabled. Summary of Possible Causes: 1. Server service is disabled.
2. Fie and Printer Sharing is disabled.
3. No folders are shared.
4. Firewall blocks the sharing.
Backing up your data files to a shared drive. You could map your drive and then use the internal Windows Backup program to copy your important files to a shared drive for safe keeping. When asked where to back up the files to just browse the network for the shared drive. All free, just the way I like it.
You can also use the "net use" command to auto login to mapped drives for your customers You can use the net use command for batch files and scripts. To use the net use command to map or disconnect a drive: Click Start, and then click Run In the Open box, type cmd. Type net use x: \\computer name\share name, where x: is the drive letter you want to assign to the shared resource. To Disconnect a mapped drive: Type net use x: /delete, where x: is the drive letter of the shared resource.
Logon Script keeps asking for a password? Symptom: I use a login batch file to map a network drive when starting the computer. The problem is that it always asks me for the password. How can I make that it remembers the password? Resolutions: 1. Add the password into the login batch file, for example, net use \\computername\shared password
2. If you are logging on a peer-to-peer workgroup, create the same user account and password on both computers. Top
Why do some mapped drives show a red "X" or Disconnect on me after a while? SYMPTOMS: You find that the network drive mapping may be disconnected after 15 minutes of inactivity and Windows Explorer may display a red "X" on the icon of the mapped drive. However, if you double-click it reconnects quickly. RESOLUTION: by default, idle connections will be dropped after 15 minutes. To modify idle time, at a command prompt using net config server /autodisconnect: minutes. For example, to set the Autodisconnect value to 30 minutes, you would run the following command line: net config server /autodisconnect:30 If you would like to turn Autodisconnect off, do net config server /autodisconnect:-1
How Drive Letters are Assigned to Mapped Drives. When mapping a drive in Windows 2K it automatically chooses the next available drive letter, and you can accept that choice or choose a different (unused) letter. Vista and XP select Z for the first mapped drive, then work backwards through the alphabet as you add more mapped drives.
Did You Know That You Can Change the Assigned Windows Drive Letters? Control panel, Administrative Tools, Computer Management You should be here: 
Now just right click on the drive you want to change the letter on, as shown below: 
Microsoft has a link to this tip as well. > MS How to chg drive letters Be careful here. Make sure the drive letter you choose is not already in use. You may have to change some drives to a temporary drive letter in order to get it to have the drive letter you want. Top
Mapping a Folder as a Virtual Drive with a Drive Letter It can be useful to map a very deep nested folder as a drive letter, so it is easier to access by Windows Explorer along with all the other applications that might access that folder. This is done with the "subst" command. Command line is: Subst x: C:\Very\Long\Folder\Path where "x" is the desired drive letter. To free up the assigned drive letter again use the subst command again. Command line is: Subst x: /D Note: When you reboot, these designations are cleared. To make it stick you need to run a batch file with these commands at start up.
Here's a Problem I encounter often when trying to connect to one of my mapped drives on my network. "Not enough server storage is available to process this command" Took me a while to find the answer to this one so I had to include it. This error message indicates the IRPStackSize bug on the remote computer (the one you are trying to access over the network). On that computer open the event log and check for event ID 2011. If this is present, it is a strong indication of this particular bug. To repair it, you need to set the IRPStackSize parameter in the registry to a value of 25. Maybe even a higher number. Default is 15.
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\lanmanserver\parameters
Check for the presence of a value named IRPStackSize. If it doesn't exist, create it as type DWORD and, with base set to decimal, enter the value 25. Exit from the registry and reboot the computer. I know I'll need this one again someday. Top
A problem I sometimes run into is by disconnecting and connecting various drives my drive letters
get all crazy. How can I make a particular drive always have the same drive letter? Go to Control Panel, Administrative Tools, Computer Management. Click on Storage in the left pane, then on Disk Management. Click on a drive and then properties. Then select "Change Drive Letter and Paths" 
Pressing enter you should see the following screen: 
Hit the Change button and you will see the following screen: 
Assign the letter you want and that's it. It should keep this designation from now on. Note: Note that Windows won’t let you change the letter of the system or boot volume, normally C: - Good thing. Also, this applies to each physical device, not only virtual partitions. I try to use this mainly for my many USB drives. And remember, If your computer is networked, you can also assign shared folders on a remote PC to a drive letter. Top
How to Create a Password for a Mapped Drive Mapped drives or Shared Folders are accessed on the network using the guest account, once the password for the guest account is set, a user in your workgroup or network domain must supply a valid username and password for the guest account to access the shared folder and contents within. We therefore need to turn on the password option for the guest account. By default it is off - no password required. - Log into Windows XP as an Administrator
- Click Start -> Control Panel -> User Accounts, then click on Guest Account and make sure it is turned on
- Now Click Start -> Run, type cmd in the entry box, and click Ok
- At the command prompt, type Net user guest password and press Enter - Gives Guest Acct password option.
Again, Click Start -> Control Panel -> User Accounts, then click on Guest Account
Notice that you can now set a password on the Guest Account. Set a Password and restart your Computer
How to add a "Map Drive" button to the toolbarWant to make it easier and quicker to map network drives and disconnect from them? You can put "Map Drive" and "Disconnect" buttons on the Explorer toolbar so you won't have to go through menus to do it. Here's how: - Click Start | My Computer.
- Right click the toolbar, then click Customize.
- In the Customize Toolbar dialog box, scroll down to Map Drive in the list of Available Toolbar Buttons in the left pane and highlight it.
- Click the Add button.
- In the left pane, highlight Disconnect.
- Click the Add button.
- Click the Close button.
- Now the new buttons appear on your toolbar. To map a drive, click the Map Drive button and navigate to the drive you want to map.
Top Hope this was informative GEGeek
| 
